Influence of Silicon Oxide and Aluminum Oxide Nanoparticles on Air and CO2 Foams Stability in Presence and

Abstract

One of the major issues in foam application for enhanced oil recovery (EOR) is the foam stability in presence and absence of oil. In this study, a systematic experimental study of the bulk and bubble scale stability of air and CO₂ foams stabilised by sodium dodecyl sulphate (SDS) and nanoparticles were conducted. Foam-oil interactions were further study in etched glass micromodel in order to investigate and compare the foam performance at static and dynamic conditions. Influence of nanoparticles hydrophobicity and oil types on foam behaviors were assessed. Static bulk and bubble-scale experiments were conducted with KRÜSS dynamic foam analyser while the flow characteristics experiments were conducted in etched glass porous medium. Results show that the foam half-life increased while the size of generated bubbles decreased with the presence of nanoparticles in the surfactant solution. Successful propagation of nanoparticles-SDS foam through capillary snap-off and lamellae division was observed in presence of oil in the porous medium. Foam stability decreases with decreasing oil viscosity and density. Except for hydrophobic aluminum oxide nanoparticles with contact angle of 118.19°, the static and dynamic stability of the air and CO₂ foams increased with increasing nanoparticles hydrophobicity. The addition of nanoparticles into the surfactant solution considerably improved foam stability due to the adsorption and aggregation of the nanoparticles at the thin lamellae and plateau border. This prevents liquid drainage and film thinning by increasing film elasticity and film strength from 23.2 µm to 136µm. It can be concluded from this study, that stable air and CO₂ foams can be generated with nanoparticles- surfactant mixed systems in absence and presence of oil with favourable nanoparticles hydrophobicity.