Abstract
Over the past few decades, recycling used lubricants have drawn much attention as a cleaner technique. The current study focuses on the fabrication and application of bio flocculant (sodium alginate) from brown algae (Sargassum Muticum) for the refining of waste lubricating oil. Further the work illustrates on the optimization of the four process parameters like refining time, refining temperature, solvent-to-waste oil ratio, and flocculant dosage at three different levels (low, intermediate and high) using Taguchi approach during the process of refining of waste lubricating oil by clean and environmental friendly extraction flocculation method. The optimized parameters for maximization of the yield (91.31 %) were observed at refining time of 60 minutes, refining temperature of 80 ?, a solvent-to-waste oil ratio of 3:1, and a flocculant dosage of 1 g/kg of solvent. A good fit of the model could be achieved with a R2 of 0.9938 and p value of 0.018. The re-refined lubricating oil had a flash point, pour point, kinematic viscosity@40 ? and 100 ? of 234 ?, -33 ?,155.21 cSt and 17.11 cSt which are comparable to the virgin lubricating oil and hence refined oil can remarkably be used for specific purpose in automotive engine after addition of requisite amount of additives.
